Product Description
1.Automatic Gypsum board machine description:
| Production Capacity of Gypsum board production line: |
2million m2/year 4million m2/year
5million m2/year 6million m2/year
8million m2/year 10million m2/year
15million m2/year 20million m2/year |
2. Raw Materials Consumption for per Square Meter Gypsum Board of gypsum board machinery
| Land Plaster |
6.8kg/m2 |
| Shielding paper |
0.48kg/m2 |
| Modified starch |
0.035kg/m2 |
| Foaming agent |
0.008kg/m2 |
| Glue |
0.005kg/m2 |
| Fiberglass (Not need badly) |
0.025kg/m2 |
| Electricity |
0.3kwh/m2 |
| Water |
4.8kg/m2 |
| Heavy oil:11000kcal/kg |
Heat consumption:3800kcal/m2 |
| Natural gas: 8500kcal/ m3 |
Heat consumption:3800kcal/m2 |
3.Gypsum board machine with Heat conductive oil drying system adopting natural gas, heavy-oil or coal as fuel
| Specifications of Final Products made with the gypsum board machinery: |
Thickness: 8mm to 20mm
Width: 1200mm, 1220mm
Length: 2000mm-3600mm |
Quality of final products, being conformity with GB/T9775-2000 (Equal to European Standard).
4. Introduction to the equipment
Gypsum powder furnishing system:
This system adopt the calibrated feeder, making the gypsum powder supplying is quite accurate, So it provides a great convenience for the mixing operation of the gypsum powder
Paper supplying system
This system have a unique way to pick up the paper,add the high precision rectify deviation machine which have a great help for the trimming of the board later
Water supplying system
The accurate measurement of screw pump to water supplying , which provides great convenience for operation
Foaming system:
This system chose barostat to supply the air, using screw pump which can making the foam into the slurry equably. So that we can adjust the weight of the board easily
Forming system:
This system is is developed by our technical department, chose the plate type forming machine instead of the pressing roller before. So enhance the antiwear ability of the machine,Prolong the service life of the machine, improve the the quality of the products and the flatness of the board surface
Drying system:
Hot oil type is using the oil temperature from the thermal oil furnace to drying the board
Dust collection system:
We chose the electronic pulse bag filter which have a good efficiency of dust collection.
Control system:
Using the PLC and sensor pieces such as variable frequency solid state relay to grantee the equipment in a good and long automatic running.
After Sales Service
1. We promise to reply in less than 24 hours
2. We will try to control the delivery in the shortest time than you expected and required.
3.Our engineer will come to your country to install and guide the equipment until the quality gypsum board come out.
Our Advantages
1. Good reputation factory
2. The quality of the finished products are good
3. Low rejection rate
4. High degree of automatic
5. Low energy consumption
6. Less maintain cost
Company Profile
Hebei LVJOE Machinery Manufacturing (group) Co.,Ltd got gypsum building material researching center, equipment manufacturing base, building material machinery import and export company. Our machineries are sold far to Asia, Europe, Africa and other place internationally.
We got more than 300 workers, from which, 6 are professor level senior engineers, 20 are intermediate and senior technicians. We mainly undertake varies of paper faced gypsum board equipments, gypsum lamination machine for decoration ceilng, gypsum powder production line, gypum block production line. light weight mineral wool ceilng board equipment and other whole set of production lines.
Depending on our own strength and design, research experience. we can put the new technology in the gypsum building material industry from abroad and domestic into use promptly.
Audited Supplier 
){kind=link}